Questions & Answers
Will this seatbelt work in a 1953 Willy's truck?
Willys Jeep Parts Tech:
Sure, its a universal lap belt.
Sure, its a universal lap belt.
Would you use this for the backseat of a 1948 CJ 2A?
Willys Jeep Parts Tech:
This is a great belt for that application.
This is a great belt for that application.
I have a 1965 Willys CJ-5. If I can not find a predrilled hole to attach the seat belt bolts to, is there required fender washer size I need to have installed? Any other advise for the seat belt attachment will be greatly appreciated. Thanks, Don
Willys Jeep Parts Tech:
You typically would not have a pre drilled hole. We use a large fender washer to prevent pull thru.
You typically would not have a pre drilled hole. We use a large fender washer to prevent pull thru.
Will this work on a 1948 Willys Station Wagon?
Willys Jeep Parts Tech:
Yes, this is what I would use.
Yes, this is what I would use.
Will these work on my 1954 Willys Truck?
Willys Jeep Parts Tech:
Yes it is what we recommend.
Yes it is what we recommend.
Do you have these in stock ? And if paid for tomarrow when would they ship?? THANK YOU
Willys Jeep Parts Tech:
Yes, we stock these and they ship right out.
Yes, we stock these and they ship right out.
How long are they at maximum length?
Willys Jeep Parts Tech:
I believe 60" but will have to confirm.
I believe 60" but will have to confirm.
For the Rear seat, can two of these be used, or would it have to be a single across the lap belt setup that would have to be used?
Willys Jeep Parts Tech:
We typically do 2 of them in the rear. They fit nicely.
We typically do 2 of them in the rear. They fit nicely.
Your list of fits doesn't identify my 1960 cj6 as a fit......if it works will it fit both front and rear seats?....thank you......jeff
Willys Jeep Parts Tech:
Yes, these fit CJ-6 as well front and rear.
Yes, these fit CJ-6 as well front and rear.
Will these seat belts fit my front 2 seats in my 56 willys wagon.
Willys Jeep Parts Tech:
Yes I would order 2 of them for the front and 2 for the rear.
Yes I would order 2 of them for the front and 2 for the rear.
I am purchasing a 54 Willys wagon. Will these belts work for the rear seat? Are there existing holes or am I drilling?
Willys Jeep Parts Tech:
This is the belt is would use. You will have to just drill the 2 mounting holes.
This is the belt is would use. You will have to just drill the 2 mounting holes.
I am rebuilding a 1965 Cj5, it didnt have any seats or seat belts when i got it. What seats should i use and would these seat belts work for it?
Willys Tech:
We can help you locate good used seat frames and the BELT-1, BELT-2, or BELT-3 are all good choices. Please call us toll free.
We can help you locate good used seat frames and the BELT-1, BELT-2, or BELT-3 are all good choices. Please call us toll free.
What is the width of the belts?
Willys Tech:
1-7/8 like most belts.
1-7/8 like most belts.
Can the be used for the rear seat for my 1969 CJ5 462 Jeep?
Willys Tech:
Yes, This is what I recommend for that.
Yes, This is what I recommend for that.
What is the length on each of the pieces? I have a 1960 Willys pickup that does not appear to have ever had seat belts. I was hoping to mount these using the existing bolts that are for the seat frame. Thanks
Willys Tech:
I believe they are 60 and should work just fine for you.
I believe they are 60 and should work just fine for you.
HEY I HAVE A QUESTION MIKE, DO I NEED SEATBELTS IN MY 1957 WILLYS 1 TON PICKUP. IT DONT HAVE THEM NOW. I WOUL RATHER NOT PUT THEM IN IF I DONT NEED. THANKS
Willys Tech:
You will have to check with your local and state laws on that. Alot of times because of the age of the vehicle you may not have to.
You will have to check with your local and state laws on that. Alot of times because of the age of the vehicle you may not have to.
have a 1995 jeep. driving and the clutch went to the floor. replaced the clutch master cyclinder still no clutch. any ideas thank you for your help
Willys Tech:
A 1955 Willys Jeep never used a clutch master cylinder so you have something unoriginal on there. Call us toll free. We can probably help you troubleshoot it.
A 1955 Willys Jeep never used a clutch master cylinder so you have something unoriginal on there. Call us toll free. We can probably help you troubleshoot it.
Is there any reason these can't be used in the rear seat on my '69 CJ5? If not, do you have seat belts for the rear?
Willys Tech:
These will work just fine in the rear too.
These will work just fine in the rear too.
I have a 1951 CJ-3A. I have received your non-retractable seat belts and am ready to install them. Where should I fasten them on the body for the driver and passenger seats? Also, do I need any other hardware to mount them to my Willy's? This is my first Willy's Jeep so wanted to make sure I do it right and that it is supported well. Thank you!
Willys Tech:
Place the mounts to the left and right of each seat in a spot that the washer is able to lay flat so it gets the maximum support from the floor board. All the hardware is included. Thanks again!
Place the mounts to the left and right of each seat in a spot that the washer is able to lay flat so it gets the maximum support from the floor board. All the hardware is included. Thanks again!
Do these mount to pre-existing holes or do they need to be drilled?
Willys Tech:
It depends on your vehicle. Some were predrilled some never had them. They work either way.
It depends on your vehicle. Some were predrilled some never had them. They work either way.
what length are the seat belts
Willys Tech:
We will check.
We will check.
YOU MIGHT ALSO BE INTERESTED IN
