Questions & Answers
What’s the best 12 volt replacement for A1411-M38 and 118113. I have a 1952 M38 and want something that fits into the dash like to old 24V lights. I bought a replacement body from you and that’s the dash I am working on.
Willys Jeep Parts Tech:
You could try: A1411 but the hole diameter is just a bit different. Youd have to get around that.
You could try: A1411 but the hole diameter is just a bit different. Youd have to get around that.
Dash lights for a M38A1 that has been wired 12 volt. Can the 24 volt lights be adapted? Suggestions on lights that may work?
Willys Tech:
You can probably do this by taking them apart and swaping out the bulb.
You can probably do this by taking them apart and swaping out the bulb.
I am looking for the dash lights for a 1952 M38 with 12V system. Are these the correct fixtures?
Willys Jeep Parts Tech:
These are for 24 volt. We do have MB style lights that you could put a 12 volt bulb in but they are smaller and a bit different design.
These are for 24 volt. We do have MB style lights that you could put a 12 volt bulb in but they are smaller and a bit different design.
Do you happen to offer the internal rubber grommet/seal piece as a separate part? If not any suggestions where I might find a supplier?
Willys Jeep Parts Tech:
Give us a call toll free at 888-648-4923 and we maybe able to fix you up. Thanks
Give us a call toll free at 888-648-4923 and we maybe able to fix you up. Thanks
can you supply the covers that go over the dash light, used is ok.
Willys Jeep Parts Tech:
No one makes the cover new. Give me a call toll free and we can go over some other options. Thanks
No one makes the cover new. Give me a call toll free and we can go over some other options. Thanks
got it thanks, hold the base and turn the top counter clock wise. thanks for the help. do you sell the12 volt bulbs?
Willys Jeep Parts Tech:
Sorry, those you would have to match up locally for that item.
Sorry, those you would have to match up locally for that item.
how do you take them apart.......does the pin slide out?
Willys Jeep Parts Tech:
These are sealed units. They have to be pried apart.
These are sealed units. They have to be pried apart.
I bought a 1951 m38 the motor was converted to 12v do I need to rewire the lights and headlights and if so what part number thanks for your time
Willys Tech:
There are quite a few lights. The headlights are part number: 944909
There are quite a few lights. The headlights are part number: 944909
I bought them but do not find where they fit in.Where do you install them on the M38A1?
Willys Tech:
They go right into the dash panel that holds the gauges into place - on either side of the speedo.
They go right into the dash panel that holds the gauges into place - on either side of the speedo.
Are they for a 12 volt system?
Willys Tech:
These are for 24 volt.
These are for 24 volt.
YOU MIGHT ALSO BE INTERESTED IN
