Product Videos
Questions & Answers
When i turn the power switch on to start my m39a1, the wire going from the loom to the coil smokes and sparks. I have a complete new loom and replaced the on foo switch, any suggestions? Please email me.
Willys Jeep Parts Tech.:
Email jason@kaiserwillys.com. We can walk to you thru what to check on your wiring.
Email jason@kaiserwillys.com. We can walk to you thru what to check on your wiring.
My 24v M38 coil shows 12 ohms resistance for the primary coil rather than the 6 or so ohms according to specs. Could this be why I can’t get amy spark at my points???
Willys Jeep Parts Tech:
Very good chance. Email mike@kaiserwillys.com and we can get you with our 24 volt wiring guy. Thanks!
Very good chance. Email mike@kaiserwillys.com and we can get you with our 24 volt wiring guy. Thanks!
I have a 1967 m715 does this fit my vehicle?
Willys Jeep Parts Tech:
We have never sold it to fit that vehicle. It would match the necessary specs, but on the M38 and M38 A1 this coil fits inside the distributor.
We have never sold it to fit that vehicle. It would match the necessary specs, but on the M38 and M38 A1 this coil fits inside the distributor.
What is the resistance of this coil (1) between + and - terminal and (2) between + or - terminal to the center point of the coil?
Willys Jeep Parts Tech:
You should be getting about 6.1 ohms give or take on the 24 volt coil.
You should be getting about 6.1 ohms give or take on the 24 volt coil.
How is this coil wired in an M38. I have several wiring diagrams and I didn't see it mentioned in any of them. Thank you
Willys Jeep Parts Tech:
It goes directly into your distributor itself. Please email mike@kaiserwillys.com and we can help out. See TK100 and you can see the cap.
It goes directly into your distributor itself. Please email mike@kaiserwillys.com and we can help out. See TK100 and you can see the cap.
Are these import coils or American made.? I have had problems with the imports.
Willys Tech:
They are Newstar so I believe they are American.
They are Newstar so I believe they are American.
I want to know If you have a coil like this in 12V, I want to switch 6V to 12V.
Willys Tech:
933160 is the 12 volt coil we carry.
933160 is the 12 volt coil we carry.
In looking at my existing tank compared to this, this tank appears to be a side fill tank. Do you have the rear fill tank avail.? This looks the same as the side fill tank pic as well.
Willys Tech:
The picture is a substitue one. This part number will be for the REAR filler neck.
The picture is a substitue one. This part number will be for the REAR filler neck.
Is this the same coil for a M151 part#19207-11660366? It looks the same from the picture.
Willys Tech:
Yes I believe they are the same.
Yes I believe they are the same.
do you have the s -shaped hose between the tank and plastic filler neck for this rear fill tank
Willys Tech:
That you have to match something up locally.
That you have to match something up locally.
Does the coil have an internal resistor? Thanks, John
Willys Tech:
Yes I believe so.
Yes I believe so.
is there a 12volt coil that will fit in a 24volt distributor switched my 24 volt sys to 12v this is the last peice of the puzzle
Willys Tech:
I have a 12volt coil available as well as a few options for you. Please call us toll free. Im more than happy to help out.
I have a 12volt coil available as well as a few options for you. Please call us toll free. Im more than happy to help out.
YOU MIGHT ALSO BE INTERESTED IN
