NOS Ignition Switch with keys
Fits 46-71 Jeep & Willys
(Out of Stock)
New Old Stock Ignition Switch with keys
Complete with outside bezel for easy screw on install and lock cylinder wtih keys. Direct replacement for stuck, worn out switches.
These are NOS originals never installed and made in the USA.
Wiring:
IGN> to coil
BAT> + to Battery
Acc> and accessories that need power such as heater, radio, ect
ST> to starter/starter solenoid
Helpful Guides and Illustration:
12 Volt Starter Solenoid Diagram
Fits:
46-49 CJ-2A
49-53 CJ-3A
53-64 CJ-3B
55-71 CJ-5
46-64 Truck
46-64 Station Wagon
48-51 Jeepster
57-64 FC-150
57-64 FC-170
| Part # | Price |
|---|---|
| 924900 | $39.99 MSRP: |
$39.99
MSRP:
Questions & Answers
IS THIS IGNITION SWITCH ALS USED FOR THE ORIGINAL 6 VOLT SYSTEM
Willys Jeep Parts Tech:
Yes you can use this for 6 or 12V.
Yes you can use this for 6 or 12V.
I'm done with my foot switch in my CJ3A 1951. Can I buy one of these to bypass that foot switch and the piece that bolts on to the starter.
Willys Jeep Parts Tech:
Yes, you should be able to wire direct.
Yes, you should be able to wire direct.
I am converting to 12 v, and buying my starter and alternator from you for my CJ3A. Does this keyed switch also replace the need for the foot switch (or I still can use a foot switch if want to do so)? Thanks Jim
Willys Jeep Parts Tech:
Yes, most people go over to a key switch and are off and running.
Yes, most people go over to a key switch and are off and running.
YOU MIGHT ALSO BE INTERESTED IN
