Product Videos
Questions & Answers
Does it fits a CJ3A? Is it a NOS equivalent to Part # 647693?
Willys Jeep Parts Tech:
No they are not. The CJ3A and the M38 used different boxes with different sector shaft sizes.
No they are not. The CJ3A and the M38 used different boxes with different sector shaft sizes.
I am looking for one like this for my 55 wagon. it's 44 1/8 inches long. Thanks.
Willys Jeep Parts Tech:
Used only. Email mike@kaiserwillys.com to help.
Used only. Email mike@kaiserwillys.com to help.
I have a 1952 willy's M38 Steering shaft& worm gear in disrepair ie bent the worm gear is longer than mb etc I take it sector shaft is 15/16" rather than 7/8" can you supply correct one 42" long please advise regards Terry
Willys Jeep Parts Tech:
If you have a M38 then this would be the one 804388.
If you have a M38 then this would be the one 804388.
I have a worm with TA123001 stamped on it. Will this one fit?
Willys Jeep Parts Tech:
Please email mike@Kaiserwillys.com more vehicle in formation and we can help out. Thanks!
Please email mike@Kaiserwillys.com more vehicle in formation and we can help out. Thanks!
Is your M38 42 worm gear made in the USA and or NOS?
Willys Tech:
Our current supply are NOS originals.
Our current supply are NOS originals.
Mike, What is the best lubricant to use in the gear box around the worm gear and bearings? Heard every thing from axle grease to 140 weight oil? Thanks, Mark
Willys Jeep Parts Tech:
We typically use 90 weight gear oil. Ive seen people use knuckle lube, heavy duty axle grease, ect ect.
We typically use 90 weight gear oil. Ive seen people use knuckle lube, heavy duty axle grease, ect ect.
mike, trying to find the proper steering box tube and worm gear for my 1963 m38a1, i have the 5/16 sector shaft and i know the worm gear i have is 42 inches long, however as we discussed i think this is a different set up then what this jeep came with, the shaft I have does have a number on it if that will help, Thanks Mike G.
Willys Tech:
Please call us toll free. I can have you take some measurements on your old sector shaft and we can figure it out together.
Please call us toll free. I can have you take some measurements on your old sector shaft and we can figure it out together.
Can you replace the steering gear tube without replacing the worm gear? Worm gear looks ok, tube appears to be broken.
Willys Tech:
They are all one piece so it has to be replaced as a unit.
They are all one piece so it has to be replaced as a unit.
Do you guys sell the horn switch and adapter (1952 M38) that attaches to the bottom of the steering gear box?
Willys Tech:
852641 is the part number you need for the M38.
852641 is the part number you need for the M38.
I have a 1950 Jeepster which Steering gear box and tube would I use?
Willys Tech:
We can get Willys Jeepster tube & worm gears good used for you. Please call us toll free.
We can get Willys Jeepster tube & worm gears good used for you. Please call us toll free.
I have a 51 willys pickup. Which Steering Gear Box Tube & Worm Gear would I use to replace mine? Mine was cut in two using a plasma cutter by the previous owner.
Willys Tech:
We can get you a good used one for the Willys Truck. Please call us toll free.
We can get you a good used one for the Willys Truck. Please call us toll free.
YOU MIGHT ALSO BE INTERESTED IN
