Oil Bath Air (Filter) Cleaner to Carburetor Air Horn Seal (hose)
Fits 53-71 CJ-3B, 5
New Replacement Air Cleaner to Carburetor Air Horn Seal
Connect your oil bath air cleaner to your carburetor air horn with a flexible rubber seal.
Application:
4-134 F engine
Measurements:
Overall Length: 6-1/2"
OD: 3-1/4"
ID: 2-1/2"
Fits:
53-64 CJ-3B
55-71 CJ-5
52-66 M38A1 (with down draft carburetor)
| Part # | Price |
|---|---|
| 926945 | $16.99 MSRP: |
$16.99
MSRP:
Questions & Answers
what do I do with the two vent hoses (valve cover and oil filler) when I take away the oil bath and go to just a dry air cleaner on my cj-3b?
Willys Jeep Tech.:
I would put a simple filter over for venting or run a hose to them and down so they still vent and dont get debris in them.
I would put a simple filter over for venting or run a hose to them and down so they still vent and dont get debris in them.
How long is hose 926945? My current hose is about 10", since there is an air tube between the air cleaner and the carb
Willys Jeep Parts Tech:
Here are the dimensions: Overall Length: 6-1/2" OD: 3-1/4" ID: 2-1/2" Thanks
Here are the dimensions: Overall Length: 6-1/2" OD: 3-1/4" ID: 2-1/2" Thanks
Will this hose fit a 1951 CJ-3A?
Willys Tech:
http://www.kaiserwillys.com/category/fuel-exhaust-air-cleaner-diagram
http://www.kaiserwillys.com/category/fuel-exhaust-air-cleaner-diagram
The manual recommends cleaning the body of the air cleaner with a cleaning solution. What should that be?
Willys Tech:
I would use a degreaser and the sun to clean these out. Typically you can soak it and let it dry.
I would use a degreaser and the sun to clean these out. Typically you can soak it and let it dry.
how long is hose &inside dia.
Willys Tech:
They are approx 10 x 2.5 They give you extra...
They are approx 10 x 2.5 They give you extra...
What is the overall length of this hose?
Willys Tech:
It is approx 10.5 like original.
It is approx 10.5 like original.
Is there free shipping on this item because of the light weight?
Willys Tech:
We can get you free shipping on orders over $98.00
We can get you free shipping on orders over $98.00
will this replace the one on a 1950 truck
Willys Tech:
No this is for M38A1 only.
No this is for M38A1 only.
What clamps would I use for this? The only clamp I see is part number 648024-CLAMP but the description says for L-head engines.
Willys Tech:
This comes with the clamp to the carburetor. The 648024-CLAMP will work fine for the other end.
This comes with the clamp to the carburetor. The 648024-CLAMP will work fine for the other end.
YOU MIGHT ALSO BE INTERESTED IN
