Original Reproduction Tail & Stop Light Assembly for Drivers Side
Fits 55-69 CJ-3B, 5, FC-150, FC-170
Original Reproduction Tail and Stop Light Assembly for Drivers Side
This drivers light assembly has the lens to illuminate the license plate.
The lens is held in with a snap ring. This light has 2" centers on mounting studs and 4 1/4" lens diameter. The housing is metal with a plastic lens and the stand is included to space the tail light out from the body to shine on the license plate better.
Keep your vehicle original with these reproductions of the original HALL tail lights. Comes comlete with pigtails out back and metal housing. Dont be fooled by the cheap plastic ones!!!
1 required per vehicle.
Fits:
55-64 CJ-3B
55-69 CJ-5
57-64 FC-150
57-64 FC-170
Note:
Red is for brake and turn signal (high side of bulb), Black is for running lights (low side of bulb)
| Part # | Price |
|---|---|
| 912227 | $45.99 MSRP: |
$45.99
MSRP:
Questions & Answers
I'm looking to have taillights installed on my jeep's body (current ones only on a Kelly hardtop) and there's no previous installation holes on the back of the body.. were these placed on the lower edge? And are these correct for a 1961 CJ-5 (non tuxedo)
Yes, on the tail light panel a few inches from the bottom between quarter panel and tail gate surround.
Where can I get a replacement lens? Thanks M
Sorry, we can only get complete assemblies.
Is there something that needs to be done to these lights to make them function as a tail light and blinker light. The one I got doesn’t ground through the housing (#912227) it has two wires and one of them has to be grounded to make the light work. It will work as a tail light or blinker but not both and the same filament lights up either way you hook it up.
You just need to use a dual filament bulb and wire into your turn signal harness.
Is there a LED bulb option available?
12403.84 in 12 volt.
I like these and want to keep close to original. Do you sell the 6V bulbs with dual filament for blinker operation? If so, do you have part number.
We do have a bulb for them. Please email mike@kaiserwillys.com to help. Thanks!
I added these tail lights #12403.84 to my 1957 CJ5. I need signal lights and break lights added. What parts do I need to order to get the additional lights required or is there 1 unit that will do all 3 functions - tail lights, break light and turn signals?
One wire is the running light, the other is the brake light. It grounds through the housing.
These function as brake and tail lights all in one.
are these also blinkers
Yes, they will work as blinker lights as long as you change the bulb to a dual filament bulb. Thanks
Can you tell me the approx. diameter of these lights? thanks
4" diameter lens
Do you have replacement lens for these lights?
No sorry you can only get a complete assembly.
Do items 912227 and 912243 contain glass or plastic lenses? Thanks
These are glass like original.
Will this rear light assembly and the corresponding passenger side light work with the turn signals?
Yes, these can we wired in for turn signals.
Do these come with the bulbs?
Yes these do come with 12 volt bulbs in them.
Can I get this in chrome. I believe they were on 65 tuxedo park mark iv. is that correct?
No these are not available in chrome.
Are these the EXACT REPLICAS of the originals? I thought the originals had a chrome bezel?
Early CJ-3B's used a chrome bezel. It depends on your year. Early CJ-3B's used part number: 801157
YOU MIGHT ALSO BE INTERESTED IN
