Plastic Tail & Stop Light Assembly for Driver Side (12 Volt)
Fits 46-55 Jeep & Willys
Plastic Tail and Stop Light Assembly for Driver Side (1 required per vehicle)
Tail light assembly comes with a 12 volt bulb.
Fits:
46-49 CJ-2A
49-53 CJ-3A
53-55 CJ-3B
46-55 Truck
46-51 Station Wagon
48-51 Jeepster
| Part # | Price |
|---|---|
| 801157P | $22.99 MSRP: |
$22.99
MSRP:
Questions & Answers
Can you provide the diameter, depth and distance between mounting studs?
Willys Jeep Parts Tech:
2" center on center on studs. Not sure which exact measurements your looking for on the other. Please email mike@kaiserwillys.com
2" center on center on studs. Not sure which exact measurements your looking for on the other. Please email mike@kaiserwillys.com
i have a 1947 CJ-2A , does this light assembly mount into the existing hole that the original tail light assembly on the drives side is in? or do i need to make the whole bigger/smaller?
Willys Tech:
Yes this mounts thru the original holes. No drilling required.
Yes this mounts thru the original holes. No drilling required.
Hi, My ‘48 CJ2a is wired for turn signals and I need to replace driver’s side rear tail light assembly. Will my turn signals work with this light? Thanks Steve
Willys Jeep Parts Tech:
Yes, you can use a dual filament bulb with these.
Yes, you can use a dual filament bulb with these.
Can these be use for a M38a1?
Willys Jeep Parts Tech:
I'm sure you could make these work. The first thing to know is that these assemblies are not for the 24 volt system. The other thing you may have to modify the back panel to mount them. Thanks
I'm sure you could make these work. The first thing to know is that these assemblies are not for the 24 volt system. The other thing you may have to modify the back panel to mount them. Thanks
What triggers the difference between running lights and brake lights? Does the brake cylinder switch handle both features using one wire? And at the taillight, is the other wire for future turn signal with ground provided by chassis ground? Thanks
Willys Jeep Parts Tech:
Your headlight control switch will control this. Yes, it is grounded via the frame.
Your headlight control switch will control this. Yes, it is grounded via the frame.
To be used as a turn signal as well as a tail and stop light, does this require a new socket, or only a duel filament bulb?
Willys Jeep Parts Tech:
You'll only have to change out the bulbs to dual filament bulbs. Thanks
You'll only have to change out the bulbs to dual filament bulbs. Thanks
I have part number 647801 brake light switch but when i am running lights i do not have brake lights but i do have blinkers
Willys Jeep Parts Tech:
Please call us toll free. Ask for me Mike M. I can try to help.
Please call us toll free. Ask for me Mike M. I can try to help.
All I need is the red lens for the tail light of a 1950 Willys pickup. Do you have just that part? if not, do you have a replacement fixture which might also come with a passenger side tail light as well?
Willys Jeep Parts Tech:
No, you do have to buy the whole assembly even though you just need the lens. Thanks
No, you do have to buy the whole assembly even though you just need the lens. Thanks
Does this come with the bulb included?
Willys Tech:
Yes, I do believe they come with a 12 volt bulb that could be swapped if you need 6 volt.
Yes, I do believe they come with a 12 volt bulb that could be swapped if you need 6 volt.
When I hit the brakes the tail light doesn't work, bulbs, blinkers and directionals work. Is there a part or linkage to the brakes I am missing?
Willys Tech:
You probably need part number: 647801 brake light switch
You probably need part number: 647801 brake light switch
YOU MIGHT ALSO BE INTERESTED IN
