Questions & Answers
Would these work on a 52 m38a1 that has been converted to 12v?
Willys Jeep Parts Tech:
Electrically speaking, yes. But they are smaller than the original tail lights for that vehicle.
Electrically speaking, yes. But they are smaller than the original tail lights for that vehicle.
Does this come with the wiring needed for it to light up when you hit the brakes?
Willys Jeep Parts Tech:
Yes, it will have pig tails out the back.
Yes, it will have pig tails out the back.
Do these come with dual filament bulbs?
Willys Jeep Parts Tech:
Yes, that is correct.
Yes, that is correct.
are these light metal or plastic ?
Willys Jeep Parts Tech:
These are plastic lights. Thanks
These are plastic lights. Thanks
What are the basic dimensions of this part? Length and width?
Willys Jeep Parts Tech:
LENS OD 3 ¾in BODY OD 3in Body height 2 3/8 in
LENS OD 3 ¾in BODY OD 3in Body height 2 3/8 in
Do you have a stock appearing taillight for a 1950 Jeepster that would accomodate provisions for 6 V turn signals?
Willys Jeep Parts Tech:
801158A & 801157A are the part numbers you need.
801158A & 801157A are the part numbers you need.
Will this light work on a 6 volt system?
Willys Tech:
Yes these will work on both 6 and 12 volt. Just swap the bulb.
Yes these will work on both 6 and 12 volt. Just swap the bulb.
Is this the same as the driver side light but without the tag illumination clear portion on the bottom So it can be used on the driver side?
Willys Tech:
Yes you could use it on either. That is correct.
Yes you could use it on either. That is correct.
YOU MIGHT ALSO BE INTERESTED IN
