Questions & Answers
I have a Dana 27 in a 66 cj, pull the front cover off and it has a 8 bolt ring gear and is 7.2 in diameter with a 5:38 gear ratio. Is that normal and do you have that in stock?9
Willys Jeep Parts Tech:
Yes, email mike@Kaiserwillys.com the 5 digit number on either the shaft or the ring and I can confirm all for you.
Yes, email mike@Kaiserwillys.com the 5 digit number on either the shaft or the ring and I can confirm all for you.
Hi are these new? or used?
Willys Jeep Parts Tech:
These are Take outs - which means they are used.
These are Take outs - which means they are used.
Looking for Dana 27 ring and pinion 43-14. 3.07
Willys Jeep Parts Tech:
Please email mike@Kaiserwillys.com your vehicle information and we can help.
Please email mike@Kaiserwillys.com your vehicle information and we can help.
Hello; I have a 53 m38a1 with 5.38 gear sets. My question is, is the front pinion shaft always coarse spline, or can that vary? Thanks Ted
Willys Jeep Parts Tech:
Originally they were 10 spline.
Originally they were 10 spline.
I have a 1951 CJ3A , I am looking to for a 4.10 ring and pinion gear set for a dana 25 , I have changed the rear end (dana 44 ) from 5.38s to 4.10 , is there such a set ?
Willys Tech:
Sorry, your best bet is going to be getting the part number: SATURN
Sorry, your best bet is going to be getting the part number: SATURN
I have a 1967 Jeep CJ 5. I am looking for a RING & PINION GEAR SET for Dana 27 front. The rear gear ratios are 8:43. But I don't know the ratio for the front since the parts have been removed from it. Please let me know whether you carry a Data 27 gear set for front? If yes, what part is it?
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com and I can try to help out on this and get clarification too.
Please email mike@kaiserwillys.com and I can try to help out on this and get clarification too.
i need thes part, what is the problem for selected, jeep 1962 dana 25 43x8
Willys Jeep Parts Tech:
This item is available used only right now.
This item is available used only right now.
would the item # 801928 be a good choice for the 1955 cj5 with a sbc & 31" tires?
Willys Jeep Parts Tech:
Email mike@kaiserwillys.com and i can help out with this.
Email mike@kaiserwillys.com and i can help out with this.
Hi, I need the following Front Axle Ring & Pinion parts for my 1966 CJ5 : DANA A3D93 43-8 / DANA 31543 43-8 A3R72
Willys Tech:
Ok, please call us toll free. Im sure we can match it up for you.
Ok, please call us toll free. Im sure we can match it up for you.
Hello, do you have a kit that will change the ratio of my original '53 Willys Wagon Dana 25 front end to a 3.07 ratio? I need it to match the back of the donor vehicle.
Willys Tech:
That is gonna be tough. Your best bet is to get part number: SATURN that will give you 25% more top end.
That is gonna be tough. Your best bet is to get part number: SATURN that will give you 25% more top end.
i have a 1965 cj5 with dana 27 front diff. with 43-8 gear count trying to find ring and pinion set
Willys Tech:
We should have them. Please call us toll free. We can get you fixed up. Make sure you have the numbers of your ring and pinion when calling so we can match it up.
We should have them. Please call us toll free. We can get you fixed up. Make sure you have the numbers of your ring and pinion when calling so we can match it up.
YOU MIGHT ALSO BE INTERESTED IN
