Questions & Answers
I have a 51 willys 4x4 with timken rear axle I need two outer grease seals and two inner oil seals . Can do?
Willys Jeep Parts Tech:
See part numbers: 914802 & 644254
See part numbers: 914802 & 644254
When will this part be available. Mine are shot and can not reassemble without.
Willys Jeep Parts Tech:
914802 is what you have to use. The seal is the same. Then you have to file/drill some of the holes to match the backing plate to make work.
914802 is what you have to use. The seal is the same. Then you have to file/drill some of the holes to match the backing plate to make work.
In this photo you have the "retainer, grease assembly" (p/n 641365) which I will assume is the complete 3 piece assembly - shown with (p/n 641391) "gasket, grease protector". Is the gasket available individually as well? I have not been able to find it listed and period schematics show this gasket used on both the inside and outside of the grease retainer, so technically this part would require two gaskets for install. Thanks in advance for your help.
Willys Jeep Parts Tech:
The grease protector is used only. Email mike@kaiserwillys.com and I can give you some numbers for salvage yards.
The grease protector is used only. Email mike@kaiserwillys.com and I can give you some numbers for salvage yards.
my 51 Willys 4x4 truck has an outer seal similar to this one - is it the appropriate part or is there a different one for the truck rear axle. Thanks
Willys Tech:
The one you want is part number: 914802
The one you want is part number: 914802
YOU MIGHT ALSO BE INTERESTED IN
