Questions & Answers
Do you have, or know where to find, the intermediate cross member this attaches to?
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com your vehicle information.
Please email mike@kaiserwillys.com your vehicle information.
Will this work on my 1966 cj5 if I just bend it out?
Willys Jeep Parts Tech:
Yes, you probably could do that.
Yes, you probably could do that.
How does this attach to the frame? Bolts or weld in?
Willys Jeep Parts Tech:
Riveted/bolted.
Riveted/bolted.
I am restoring a 1951 CJ3A that had 60 years of rancher welding on the rear end. We had to cut all of that off and I have replaced the cross member with a new part from you. Do I need this V bracket if I don't need a hitch. It appears that the body..a new one...should bolt on to this V bracket but I'm unsure of that.
Willys Tech:
You wouldnt have to have it. I just wouldnt tow without it.
You wouldnt have to have it. I just wouldnt tow without it.
I am looking to tow the the vehicle from the front. Do you offer the tow bar (not correct terminology) so that I can tow my 61 CJ3B from the front?
Willys Jeep Parts Tech:
A front tow bar you would have to find a universal one at a local truck shop and mount.
A front tow bar you would have to find a universal one at a local truck shop and mount.
Hi - Can you please supply some dimensions for this item so I can see how far off it would be to fit into a 1966 CJ5?
Willys Jeep Parts Tech:
Sorry, it is only for the Willys listed above. Email mike@kaiserwillys.com and we can get whatever measurements you need. Thanks!
Sorry, it is only for the Willys listed above. Email mike@kaiserwillys.com and we can get whatever measurements you need. Thanks!
What modifications need to be done to make this fit a 1963 CJ5
Willys Jeep Parts Tech:
This is going to be more narrow than on a CJ-5 and would have to shimmed/bent to fit.
This is going to be more narrow than on a CJ-5 and would have to shimmed/bent to fit.
does the bracket have the three holes on each side as the org, one? I am working on a 42 GPW.
Willys Jeep Parts Tech:
You would have to drill these in.
You would have to drill these in.
Will this work on a 53 m38a1 or do you have one that will
Willys Jeep Parts Tech:
You will have to get that good used only.
You will have to get that good used only.
will this fit a 1961 cj5 willys
Willys Tech:
No, this is only for the vehicles listed above.
No, this is only for the vehicles listed above.
does this come with the plate that rivets into the rear crossmember
Willys Tech:
8127710-P is the plate part number. It is sold separately.
8127710-P is the plate part number. It is sold separately.
will this work on a 59 CJ5 with some simple modifications?
Willys Tech:
Im sure it would.
Im sure it would.
I am only seeing two holes in this V bracket whereas the one I took off had four holes. Is this an accurate picture?Is it the same thickness as o.e.? Thank you for any answer in advance.
Willys Tech:
Yes I believe it does have the four holes. They are OE thickness.
Yes I believe it does have the four holes. They are OE thickness.
is this original for my 1960 cj5 because i have this and a draw bar that i belive that was an opition
Willys Tech:
Yes that is correct. However CJ-5's were alittle different. Please call us toll free. We can probably help.
Yes that is correct. However CJ-5's were alittle different. Please call us toll free. We can probably help.
