Questions & Answers
Do I need a frame to bolt this to? Or is this complete in that it bolts right to the floor?
Willys Jeep Parts Tech:
There are several other components that are needed to install this seat. If you do not have the pre-existing mounts and hardware, please call us so we can go over with you.
There are several other components that are needed to install this seat. If you do not have the pre-existing mounts and hardware, please call us so we can go over with you.
Will this seat fit in a 1960 cj5?
Willys Jeep Parts Tech:
With modifications, sure.
With modifications, sure.
The photo is olive color, does this ship olive or primed red?
Willys Jeep Parts Tech:
They come in different primer colors, but it is just a primer coat to prevent rusting until it gets an official primer applied after purchase.
They come in different primer colors, but it is just a primer coat to prevent rusting until it gets an official primer applied after purchase.
What are the measurements for this back seat?
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com and we can take any specific measurements you need.
Please email mike@kaiserwillys.com and we can take any specific measurements you need.
What hardware to I need to complete the installation of the frame to tub?
Willys Jeep Parts Tech:
This diagram really help as it shows what hardware you need and where it all goes: https://www.kaiserwillys.com/diagram/m38-diagrams/body-diagrams-willys-m38/rear-seat-50-52-m38/rear-seat Thanks
This diagram really help as it shows what hardware you need and where it all goes: https://www.kaiserwillys.com/diagram/m38-diagrams/body-diagrams-willys-m38/rear-seat-50-52-m38/rear-seat Thanks
Can this seat be fitted in a cj3a?
Willys Jeep Parts Tech:
I'm sure it could be because the bodies are basically the same but we do offer the proper CJ-3A seat frame new too.
I'm sure it could be because the bodies are basically the same but we do offer the proper CJ-3A seat frame new too.
I had read somewhere that you can fit this seat in a CJ2A. Is this true, and if so what else will I need to make it happen (starting with a blank canvas)? Thanks.
Willys Tech:
It will fit inside the wheel wells yes - but I would just use the CJ-2A rear seat frame we sell if you have a CJ-2A.
It will fit inside the wheel wells yes - but I would just use the CJ-2A rear seat frame we sell if you have a CJ-2A.
I'm looking for a hard top and doors for my 52 M38. Can y'all get one and how much am I looking at spending?
Willys Tech:
That is going to be very tough to find. We have complete soft tops or summer tops availble.
That is going to be very tough to find. We have complete soft tops or summer tops availble.
I have a 1952 M38a1 and am looking for a rear seat. Do you have one?
Willys Tech:
This is the proper one for it as well.
This is the proper one for it as well.
YOU MIGHT ALSO BE INTERESTED IN
