Questions & Answers
I am ordering this for my 1955 m38a1, I was looking at the sets of screws to buy from y’all and can’t tell what is for this one, just don’t want to buy something I cannot use
Willys Jeep Parts Tech:
There are several pieces that are used to mount this. Give us a call and someone in our parts department can help you with all that you need.
There are several pieces that are used to mount this. Give us a call and someone in our parts department can help you with all that you need.
I have a 1955 CJ5 and would like to install this seat. Could you provide a complete list of products associated to complete the project (ie. any brackets etc.) Thank you, Greg
Willys Jeep Parts Tech:
I would probably recommend going with the 3A seat we sell in the back of a CJ-5. Give us a call toll free. Happy to help out.
I would probably recommend going with the 3A seat we sell in the back of a CJ-5. Give us a call toll free. Happy to help out.
will it fit Willys 1964 6 Cylinder 4X4 Trucks?
Willys Jeep Parts Tech:
If you have a Dana 18 transfer case with T90 transmission yes.
If you have a Dana 18 transfer case with T90 transmission yes.
What is the width of this seat? What is the cushion size? Width / depth, height?
Willys Jeep Parts Tech:
The lower cushions 18" x 15.5" tall and upper is 18" x 20" tall on the upper part.
The lower cushions 18" x 15.5" tall and upper is 18" x 20" tall on the upper part.
What is the O.D., I.D. and length of this bushing (921055A)?
Willys Jeep Parts Tech:
ID .440 x OD.825
ID .440 x OD.825
will this fit a CJ3A?
Willys Jeep Parts Tech:
You want part number: A2782-3A for your CJ-3A.
You want part number: A2782-3A for your CJ-3A.
Morning. will this seat fit in a 1965 cj5 and what are the dimensions. Thanks Ian Durban South Africa
Willys Jeep Parts Tech:
Yes, this will fit for a CJ-5. There are different versions on the CJ-5 used in that time frame so you may have to drill to mount but it will match the CJ-5 body.
Yes, this will fit for a CJ-5. There are different versions on the CJ-5 used in that time frame so you may have to drill to mount but it will match the CJ-5 body.
Will this fit a 63 CJ-5? How does it mount to the floor?
Willys Jeep Parts Tech:
Please refer to this diagram as it will show you all the brackets and hardware that is needed: https://www.kaiserwillys.com/diagram/m38a1-diagrams/body-diagrams-willys-m38a1/rear-seat-52-71-m38a1/rear-seat Thanks!
Please refer to this diagram as it will show you all the brackets and hardware that is needed: https://www.kaiserwillys.com/diagram/m38a1-diagrams/body-diagrams-willys-m38a1/rear-seat-52-71-m38a1/rear-seat Thanks!
Will this rear seat for M38a1 also fit the back of the M170?
Willys Jeep Parts Tech:
Yes, I do believe they do between the wheel wells.
Yes, I do believe they do between the wheel wells.