Product Videos
Questions & Answers
Is there no body gaskets for these Part # 938897? Thanks
Willys Jeep Parts Tech:
No, there weren't any originally.
No, there weren't any originally.
Do these work with a 12 volt system?
Willys Jeep Parts Tech:
Yes and the bulb can be swapped for 6 volt as well.
Yes and the bulb can be swapped for 6 volt as well.
I have a 56 CJ5 and using the stock 6 volt system. I have only one wire going to the turn signal from the new wire harness kit that I installed. Do I simply ground the black wire to the body and hook up the red?
Willys Jeep Parts Tech:
If you have turn signals, you would wire the one from the harness in and the other wire would go to the turn signal wiring for the switch. If you don't have turn signals, just tie that wire back and it won't be used.
If you have turn signals, you would wire the one from the harness in and the other wire would go to the turn signal wiring for the switch. If you don't have turn signals, just tie that wire back and it won't be used.
1948 willys truck want to run turn signals can this product be made to fit the existing parking light opening thanks
Willys Jeep Parts Tech:
Yes, that is correct. It is a flush mount kit.
Yes, that is correct. It is a flush mount kit.
What is the diameter of this fixture? Can it replace the blackout light on the front of a Willy's M38A1?
Willys Jeep Parts Tech:
if your wanting for the marker lights in the grill and are 12 volts I would go with part number: 2A0604-DF for that vehicle.
if your wanting for the marker lights in the grill and are 12 volts I would go with part number: 2A0604-DF for that vehicle.
is it comes with the bulb?
Willys Jeep Parts Tech:
Yes, a 12 volt bulb but could be swapped for a 6 as well.
Yes, a 12 volt bulb but could be swapped for a 6 as well.
can I use for cj2a to mount inside
Willys Jeep Parts Tech:
Yes, you could flush mount these to the grille.
Yes, you could flush mount these to the grille.
What is the proper gasket to use with these assemblies? Thank you.
Willys Jeep Parts Tech:
This is a complete assembly. You don't need a gasket for it because it bolts right up. Thanks
This is a complete assembly. You don't need a gasket for it because it bolts right up. Thanks
What are the size of the light ?
Willys Jeep Parts Tech:
938897 3IN DIA. LENS 2 7/8 DIA.
938897 3IN DIA. LENS 2 7/8 DIA.
Is this a dual filament bulb?
Willys Jeep Parts Tech:
Yes, they are.
Yes, they are.
Is the distance between the mounting bolts on this light 2.5 inches?
Willys Jeep Parts Tech:
Center to center is 2-1/4" center to center on the mounting
Center to center is 2-1/4" center to center on the mounting
Will these fit a 1957 FC150? My FC didn't come with any lights so I don't have anything to compare. looking at various pictures, they look like the would fit but looks can be deceiving. Thanks.
Willys Jeep Parts Tech:
Yes, but you may have to drill the mounting studs. It will flush mount so you wont see them.
Yes, but you may have to drill the mounting studs. It will flush mount so you wont see them.
Do you have a 12 volt replacement turn signal and parking light for a 1954 Willys Truck? Please let me know. Thank you.
Willys Jeep Parts Tech:
Yes, we can help and have several options. These would work for you we also have them in clear too: 938897-CL. They can be modified to fit. We also have the original lens, bezel and gasket too if you want to stick with OEM parts.
Yes, we can help and have several options. These would work for you we also have them in clear too: 938897-CL. They can be modified to fit. We also have the original lens, bezel and gasket too if you want to stick with OEM parts.
I wish to know if the lense is plastic or glass? Thank you
Willys Tech:
These are plastic.
These are plastic.
Will the CJ 3B replacement park & turn signal lamp assembly (item# 938897) work on a CJ 3A?
Willys Tech:
Yes it will work on a CJ-3A but you may have to drill on that vehicle.
Yes it will work on a CJ-3A but you may have to drill on that vehicle.
I have a 1956 cj5, mounting studs are 2 1/2 in center to center, will these work or is there another option thx
Willys Tech:
This should work for you. We also sell them in clear lenses too.
This should work for you. We also sell them in clear lenses too.
I would like to know the diameters of the replacement parking light's, as I'am looking to fit one of 3 inch or less in my 03 tj. Thanx's
Willys Tech:
They are approx 3 in diameter
They are approx 3 in diameter
Do you have these for a 1948 CJ2A so I can wire them to my turn signal so they will blink on front? Thanks, Harry
Willys Tech:
Yes we have either the recessed or protruding style set ups used on the CJ-2A's. Please call us toll free. We can help you ID what you have and get you the right parts.
Yes we have either the recessed or protruding style set ups used on the CJ-2A's. Please call us toll free. We can help you ID what you have and get you the right parts.
Is this the right set for a 1953 cj3b?
Willys Tech:
Yes this should work just fine for the CJ-3B
Yes this should work just fine for the CJ-3B
Need lens only for 1960 cj-3b front amber (original)
Willys Tech:
Try part number: 935924
Try part number: 935924
I have a 55 truck will these be direct bolt in for the lights below the headlights? if not what is the direct bolt in part?
Willys Tech:
These can be used with some modification. I also have the proper lens and bezels for the Willys Truck if you need them too.
These can be used with some modification. I also have the proper lens and bezels for the Willys Truck if you need them too.
How do you wire these for the turn signal and parking light to work with only two wires?
Willys Tech:
Please call us toll free. We can help you out on this.
Please call us toll free. We can help you out on this.
Do these take a bezel?
Willys Tech:
No these dont use a bezel.
No these dont use a bezel.
What is the modification to make this work on a '48 cj2a later serial number 209392? How difficult is it for a novice as I am learning as I go?
Willys Tech:
You would probably just have to drill the grill out and it will mount flush and no one will know. So I would say it will be ok if your willing to drill your CJ-2A grill.
You would probably just have to drill the grill out and it will mount flush and no one will know. So I would say it will be ok if your willing to drill your CJ-2A grill.
Will these bolt right in to a 62 cj5? thanks
Willys Tech:
Yes that is correct.
Yes that is correct.
YOU MIGHT ALSO BE INTERESTED IN
