Questions & Answers
I have 1953 CJ3A need lap belts and hard ware what’s going to fit
Willys Jeep Parts Tech:
Either belt-2 or belt-1 is what you are looking for.
Either belt-2 or belt-1 is what you are looking for.
Do you sell those L-shapped brackets separate? My belts are currently attached to the floor and that bracket would make the installation much better.
Willys Jeep Parts Tech:
We should be able to get you a set. Give us a call and we can get that going for you.
We should be able to get you a set. Give us a call and we can get that going for you.
I need seatbelts for a 1959 utility wagon. What are some options. Thanks
Willys Jeep Parts Tech:
BELT-1 or BELT-2 are good options. For space though most people go with BELT-1.
BELT-1 or BELT-2 are good options. For space though most people go with BELT-1.
I purchased these belts. There are no bolts to connect belts to floor bracket. What type, size and length bolts are needed?
Willys Jeep Parts Tech:
Just depends on the vehicle and where you are putting them thru the floor. Your local hardware store will have. Thanks!
Just depends on the vehicle and where you are putting them thru the floor. Your local hardware store will have. Thanks!
Will this work in a 48 Delivery Sedan?
Willys Jeep Parts Tech:
It should. I would also consider BELT-1 too.
It should. I would also consider BELT-1 too.
Which seat belts will work best in a 1949 Truck?
Willys Jeep Parts Tech:
We topically sell 2x BELT-1 for the Willys Truck.
We topically sell 2x BELT-1 for the Willys Truck.
Which seatbelt installs best in 1960 truck. Is there room for retractable belt - 2 or retractable belt 3 ?
Willys Jeep Parts Tech:
Typically due to space people go with BELT-1.
Typically due to space people go with BELT-1.
Will these work for the front seats of a 1949 Willy's Overland Jeepster?
Willys Jeep Parts Tech:
I recommend BELT-1 due to room constraints on the Jeepster.
I recommend BELT-1 due to room constraints on the Jeepster.
Will BELT-2 work in the back seat of a CJ2A?
Willys Jeep Parts Tech:
Yes, it would. We have people use both retractable and non-retractable belts in the rear.
Yes, it would. We have people use both retractable and non-retractable belts in the rear.
i have a 1965 cj5 what belts are recommended for front and back
Willys Tech:
If you have a roll bar I would get BELT-3 for the front seats. If not either BELT-1 or BELT-2 are great.
If you have a roll bar I would get BELT-3 for the front seats. If not either BELT-1 or BELT-2 are great.
will this seat belt work on 1971 jeepester commando
Willys Tech:
Yes, these will work for the Commando as well.
Yes, these will work for the Commando as well.
I have a 1975 US Postal Jeep. Will this work?
Willys Tech:
Yes this should work for that application as well.
Yes this should work for that application as well.
I am ready to install two of these on my 48 CJ2A. Any recommendations on where to install the bolts?
Willys Tech:
To either side of the seat allowing room for it to retract and fit comfortably and proper when buckled.
To either side of the seat allowing room for it to retract and fit comfortably and proper when buckled.
What color is the seat belt-2 and can I get it in red. Thanks Ed
Willys Tech:
These are only available in black.
These are only available in black.
Will this bolt right up to the excisting seatbelt loop on my 1965 Universal? or does this require me to drill the body and mount?
Willys Tech:
Typically in 1965 they never had belts but you should be able to use the existing hole with no problem.
Typically in 1965 they never had belts but you should be able to use the existing hole with no problem.
Will this belt work with a 58 Willys Wagon?
Willys Tech:
Yes it should work just fine.
Yes it should work just fine.
will this work for a 1955 Willys P/U truck?
Willys Tech:
Yes it should work ok.
Yes it should work ok.
Will this work for the '48 Jeepster? CHP tells me I must have seat belts to drive on the street.
Willys Tech:
Yes, they should work fine for you.
Yes, they should work fine for you.