Questions & Answers
I have a 1946 CJ2A. Are both the 1/4" and 1/2" mounts compatible with my vehicle? I would prefer to use the 1/2" mounts but I do not know if the extra 1/4" space between the body and the frame will cause issues.
Willys Jeep Parts Tech:
If you feel like the body is riding higher than the traditional 1/4" pad then sure. Mounts are fairly universal, the 2A just would have used the 1/4" would have been original
If you feel like the body is riding higher than the traditional 1/4" pad then sure. Mounts are fairly universal, the 2A just would have used the 1/4" would have been original
Do you have the washers for these also?
Willys Jeep Parts Tech:
Those are a local hardware store item.
Those are a local hardware store item.
Why do you recommend the A4420 kit over the round 1/2 inch mounts?
Willys Jeep Parts Tech:
1/4" was more commonly used on the Willys Jeep and in the back bed of the Willys Truck. But email mike@kaiserwillys.com your vehicle information and we can help.
1/4" was more commonly used on the Willys Jeep and in the back bed of the Willys Truck. But email mike@kaiserwillys.com your vehicle information and we can help.
How many would I buy for a Willys Truck
Willys Jeep Parts Tech:
A4416-A you use approx 8 and 965888 you use 4. Also see part number: 668763.
A4416-A you use approx 8 and 965888 you use 4. Also see part number: 668763.
1965 CJ5 amount needed to replace all mounts
Willys Jeep Parts Tech:
A4420 is kit we recommend.
A4420 is kit we recommend.
I see the quarter windows In the slide view but not listed in the order #505000 I need them also
Willys Jeep Parts Tech:
Sorry, i don have a good pattern on those.
Sorry, i don have a good pattern on those.
Are these mount pads required for a CJ3B or only the flat pads?
Willys Jeep Parts Tech:
A4420 is what i recommend for the CJ-3A and B.
A4420 is what i recommend for the CJ-3A and B.
How many for CJ2A
Willys Jeep Parts Tech:
The CJ-2A usually only took the 1/4" (A2216) and 12 was typically used. Thanks
The CJ-2A usually only took the 1/4" (A2216) and 12 was typically used. Thanks
will this overdrive fit my Dana 20? i also run a Ramsey PTO winch on my rig
Willys Jeep Parts Tech:
Sorry, this is for the Dana 18 transfer case only.
Sorry, this is for the Dana 18 transfer case only.
How many would you buy for a wagon?
Willys Jeep Parts Tech:
We usually use 953453 for the Willys Station wagon.
We usually use 953453 for the Willys Station wagon.
What is the diameter of these rubber mounts? Thanks!
Willys Jeep Parts Tech:
OD is 1-7/8" ID is 1/2" thickness is 5/8"
OD is 1-7/8" ID is 1/2" thickness is 5/8"
How many rubber body mounts pads are there on a M38A1
Willys Jeep Parts Tech:
We typically use 12.
We typically use 12.
Can you give me the hole size and outside diameter please?
Willys Tech:
1-7/8 OD 5/8 ID
1-7/8 OD 5/8 ID