Questions & Answers
Is there a diagram that shows the correct location for the placement of the rubber mounts at the truck bed? Thanks, Billy Blakeman
Willys Jeep Parts Tech:
I dont have a specific one but mainly along the crossmembers and on the cap you have the spring loaded rear of cab mounts to keep in mind.
I dont have a specific one but mainly along the crossmembers and on the cap you have the spring loaded rear of cab mounts to keep in mind.
What is the diameter of the whole?
Willys Jeep Parts Tech:
3/4"
3/4"
What are the outside dimensions of the pad and what size is the hole? Asking because I want to use them on a different type vehicle.
Willys Jeep Parts Tech:
3 IN LONG 1 ½ IN WIDE ¼ THICK
3 IN LONG 1 ½ IN WIDE ¼ THICK
can you tell me the length size for a 1952 CJ 38 body mount bolts and are they all the same style
Willys Tech:
There are different sizes used in different locations. We do sell a Master Parts book part number: MANUAL-065. You can also call us toll free. Im sure we could look some info up for you after the phone click off and have time.
There are different sizes used in different locations. We do sell a Master Parts book part number: MANUAL-065. You can also call us toll free. Im sure we could look some info up for you after the phone click off and have time.
Can these be used under the radiator on the frame for a 1961 Willys Pick Up 6-226 Super Hurricane?
Willys Tech:
Yes, people use them for that too.
Yes, people use them for that too.
could these be trimmed and used for leaf spring rebound clip bushings???
Willys Tech:
Im sure that they could.
Im sure that they could.
I have a CJ5 from 1966. and working on a complete renovation. looking for the pads that came of the body and the parts that replace them I found the Item #: A4416 but these are square and mine are round. A'm what part do you recomment to have the original?
Willys Tech:
There are just different sytles used thru the years. We also have 1/2 and 7/8 thickness too. Those will be round.
There are just different sytles used thru the years. We also have 1/2 and 7/8 thickness too. Those will be round.
Does the Qty 1 come with all 8 or just 1?
Willys Tech:
This is each.
This is each.
What diameter is the hole in this part?
Willys Tech:
It is 3/4 on the center hole I.D.
It is 3/4 on the center hole I.D.
YOU MIGHT ALSO BE INTERESTED IN
