Questions & Answers
What is the easiest way to get the old rubber spacer out? Loosen both sides same time?
Willys Jeep Parts Tech:
Yes and some WD-40.
Yes and some WD-40.
Have the mounting bolts as well?
Willys Jeep Parts Tech:
You can pick those up at your local hardware store.
You can pick those up at your local hardware store.
What is the outside diameter and inside diameter for the bolt?
Willys Jeep Parts Tech:
You asking for the OD of the puck and the ID of the hole in the center? Please email mike@kaiserwillys.com
You asking for the OD of the puck and the ID of the hole in the center? Please email mike@kaiserwillys.com
Do you think these would work on a CJ3A? I have 1/4 inch mounts right now, but I need about 1/2 inch additional clearance for an OD/PTO combination.
Willys Jeep Parts Tech:
If you want to go higher than original they should work for you.
If you want to go higher than original they should work for you.
will these fit 1957 truck cab mounts?
Willys Jeep Parts Tech:
A4416 & 965888 are more typically for the Willys Truck.
A4416 & 965888 are more typically for the Willys Truck.
Are these the pads that would be on a 1952 willys wagon 4x4?
Willys Jeep Parts Tech:
Yes, We also have them in 1/4" thickness and 1/2" Thickness as well.
Yes, We also have them in 1/4" thickness and 1/2" Thickness as well.
Will the stock bolts reach thru these?
Willys Jeep Parts Tech:
Yes, they should if you have the Willys listed above.
Yes, they should if you have the Willys listed above.
YOU MIGHT ALSO BE INTERESTED IN
