Questions & Answers
Original 6 volt headlight on my '49 cj3a just burned out. The back of the seal beam is metal with three metal spacer tabs around the back edge. Does anyone make replacements like that? All I can find is regular all glass seal beam.
Willys Jeep Parts Tech:
Email us some photos to mike@kaiserwillys.com and we can take a look at it for you.
Email us some photos to mike@kaiserwillys.com and we can take a look at it for you.
are these bulbs 7 inch?
Willys Jeep Parts Tech:
Yes they are.
Yes they are.
Are these single beam or double (high beam-low beam)?(
Willys Jeep Parts Tech:
They are hi/low.
They are hi/low.
how can i tell if my headlamp on 48 ford f 4 is a 6 v or 12v.?
Willys Jeep Parts Tech:
Typically the bulb is stamped in the face or on the backside.
Typically the bulb is stamped in the face or on the backside.
Where are is identification to tell if I need 6v or 12v, I just purchased vehicle 1947 cj2a
Willys Jeep Parts Tech:
Check your battery, It will be stamped. If not check the coil or your voltage regulator for stamping.
Check your battery, It will be stamped. If not check the coil or your voltage regulator for stamping.
Are these the 7" lamps or 5 3/4"?
Willys Jeep Parts Tech:
7 1/2 like original.
7 1/2 like original.
I have a navy willy from 1947 and had a lecktrical overload ....... all lamps broken . He's still 6volt and large sealed beam headlamps. (2 different sises small and large) My'n are large. 1 Do you still have them 2 What price (shipping to Belgium) 3 Save to send? very breakebal????? Best regards Morre H
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com and we can help you ID what Jeep you have and go from there to help with what all you need and shipping.
Please email mike@kaiserwillys.com and we can help you ID what Jeep you have and go from there to help with what all you need and shipping.
Good afternoon, I bought three years ago two 6V sealed beam lights General Electric. I need only one (the light bulb was melted), do you have the similar General Electric Bulbs? Thank you in advance. Regards
Willys Jeep Parts Tech:
They currently are Wagner.
They currently are Wagner.
Will this switch control the dimming of the dash/gauge lights? I have a 1950 jeepster. Thanks!
Willys Tech:
They didnt use a dimmer in that year.
They didnt use a dimmer in that year.
I need a bucket for a '57 stationwagon front headlight. Do you have that
Willys Tech:
Those are available good used only.
Those are available good used only.
if I'm converting to a 12volt system, will this switch still work for my 51 willys truck
Willys Tech:
Yes it will work just fine on 6 or 12.
Yes it will work just fine on 6 or 12.
I am look for two head light bucket gaskets for a 1953 Willy's Jeep? Do you carry them?
Willys Tech:
You have to make these out of paper gasket material.
You have to make these out of paper gasket material.
Apparently I have an early Deluxe model of the pickup...the switch I have does look a little different. Will this still work in place of the one I have? Wiring has been changed somewhat, but according to the repair manual, mine is the early model...Thanks
Willys Tech:
Yes this should work perfectly for you.
Yes this should work perfectly for you.
YOU MIGHT ALSO BE INTERESTED IN
