Product Videos
Questions & Answers
would your product "Windshield Vaccum Wiper Tubing Kit Fits 41-53 MB, GPW, CJ-2A, 3A, M38 Item # B2019" also work for my M38A1 (1958)? I would actually only need the tubing! would you be able to deliver this to Switzerland and if yes, how much is the air freight? Thanks.
Willys Jeep Parts Tech:
Send mike@kaiserwillys.com an email and we can see if we can get that quoted.
Send mike@kaiserwillys.com an email and we can see if we can get that quoted.
I need an exploded view showing vitron valve
Willys Jeep Parts Tech:
Not sure what you mean. Please email mike@kaiserwillys.com
Not sure what you mean. Please email mike@kaiserwillys.com
I am looking to have m38a1 YS950 Carb rebuilt * Do you tune it on an F head engine? The last place I bought a rebuilt carb from tuned it on an L engine, and it was not set right. I would like it tuned to an F head engine
Willys Jeep Parts Tech:
These would be tuned up and set to factory spec. You need to make sure the timing on your engine is correct and you have 20 inches of vacuum draw at idle once fully warm and no longer choked (500 idle)
These would be tuned up and set to factory spec. You need to make sure the timing on your engine is correct and you have 20 inches of vacuum draw at idle once fully warm and no longer choked (500 idle)
Can you rebuild my carter carburetor for a M38 A1 1953. The model that you show differs slightly from mine. If you could, where would I send it and how much would it cost. Thank you Yves Dostaler
Willys Jeep Parts Tech:
Yes, please email mike@Kaiserwillys.com to help.
Yes, please email mike@Kaiserwillys.com to help.
Hello, I'm rebuilding a cj3b engine in a cj3a body, and I'm having the problem of hood clearance with the carburetor. I was wondering would this fit a 134 f head engine and if so what it the height from the bottom of the throttle body?
Willys Jeep Parts Tech:
Most people have to cut a hole in their hood to get the clearance they need.
Most people have to cut a hole in their hood to get the clearance they need.
I am a customer of yours. I have a YF Core. I really need a YS-950 side draft to make my 1955 M38A1 as original as possible. Will you take the YF core for this YS-950 (804826) or do you have a suggestion? Thanks Chris
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com and we can go over some options.
Please email mike@kaiserwillys.com and we can go over some options.
I’m building my M38A1 from scratch using as many NOS parts as possible. Do you have any videos showing the engine rebuild and other parts? Jeff
Willys Jeep Parts Tech:
I would get the mechanics manual part number: MANUAL-015 and that will help you out alot.
I would get the mechanics manual part number: MANUAL-015 and that will help you out alot.
hello,i have a 1954 m38a1 will you rebuild my carb.it did run but jeep has been sitting for 10 years and the carb.should be rebuilt,how much would I be charged.thank you ,jim
Willys Jeep Parts Tech:
We absolutely can rebuild your old carburetor. Just send it into us with the word "CORE" on the outside of the box and inside the box, your name and good daytime phone number. The cost is $324.99. Thanks
We absolutely can rebuild your old carburetor. Just send it into us with the word "CORE" on the outside of the box and inside the box, your name and good daytime phone number. The cost is $324.99. Thanks
Will you sell me a rebuilt YS if I send in the core of a YF? Thanks
Willys Jeep Parts Tech:
We need a YS for a YS. But I may have a core for sale. Please email mike@kaiserwillys.com
We need a YS for a YS. But I may have a core for sale. Please email mike@kaiserwillys.com
Does the complete overhaul kit come with thrust washers
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com and i can help. The camshaft thrust plate would be a separate item. Not typically part of a overhaul kit for a motor.
Please email mike@kaiserwillys.com and i can help. The camshaft thrust plate would be a separate item. Not typically part of a overhaul kit for a motor.
I have a m38a1 1963 do you all rebuild carburetors
Willys Jeep Parts Tech:
Yes, we can rebuild yours. Please email mike@kaiserwillys.com or call us toll free. Happy to help out. Thanks!
Yes, we can rebuild yours. Please email mike@kaiserwillys.com or call us toll free. Happy to help out. Thanks!
Hi. I need a carburetor for my M 38 A 1, they have this model in stock or what they recommend me. It's 1962 model. Thanks for the reply
Willys Jeep Parts Tech:
To order an original Carter carburetor please give us a call toll free at 888.648.4923. We can go thru the process of sending back your old core or, if you don't have a core, sending you a brand new replacement carburetor. Thanks
To order an original Carter carburetor please give us a call toll free at 888.648.4923. We can go thru the process of sending back your old core or, if you don't have a core, sending you a brand new replacement carburetor. Thanks
My carburetor is missing, will you sell one of these for a M38a1 without a core? I think it would have been a Carter YS-950 (side draft).
Willys Jeep Parts Tech:
I'm sorry but we do need a core to rebuild. Give us a call toll free and we can go over your other options. 888.648.4923. Thanks
I'm sorry but we do need a core to rebuild. Give us a call toll free and we can go over your other options. 888.648.4923. Thanks
Hi - I currently have a Carter YF on my jeep but want to convert to original YS can this be purchased even though you state Customer core must be sent in prior. Call for details.?
Willys Tech:
We need your core in on this first. Please call us toll free. We can help you.
We need your core in on this first. Please call us toll free. We can help you.
Do you ship too the netherlands.
Willys Tech:
Yes we ship daily USPS and UPS international. But we have to have your core in on this item first.
Yes we ship daily USPS and UPS international. But we have to have your core in on this item first.
Will this #804826 carb fit and function on a 56 M170 134cu F head
Willys Tech:
I believe it will. But you would want to match the carb id.
I believe it will. But you would want to match the carb id.