Product Videos
Questions & Answers
Will Part No 907999K fit the Ross box in an FC170. Thanks
Willys Jeep Parts Tech:
Yes, that is correct.
Yes, that is correct.
is this all i need to rebuild my steering box on my 55 willys pick up w/h flat head 6 cyl, 4x4
Willys Jeep Parts Tech:
We can help with other parts as well. Please call us toll free or email mike@kaiserwillys.com for options.
We can help with other parts as well. Please call us toll free or email mike@kaiserwillys.com for options.
Will this fit a 1950 willys truck?
Willys Jeep Parts Tech:
No, that year uses a 15/16" diameter sector shaft. We do have the bushings and oil seal for you if you like.
No, that year uses a 15/16" diameter sector shaft. We do have the bushings and oil seal for you if you like.
How do you get the old bushings out of the steering gear box?
Willys Jeep Parts Tech:
I typically use a socket to drive it out in a vise.
I typically use a socket to drive it out in a vise.
Is it possible to replace oil seal on the sector shaft by removing the pitman arm and leaving the steering box on the frame
Willys Jeep Parts Tech:
Yes, that is correct.
Yes, that is correct.
How many teeth on the steering shaft that attaches to the pitman arm?
Willys Jeep Parts Tech:
Sorry, I dont have a way to count currently due to them being out. If you count the number of teeth on your pitman arm, they are the same.
Sorry, I dont have a way to count currently due to them being out. If you count the number of teeth on your pitman arm, they are the same.
Where are the ball bearings?
Willys Jeep Parts Tech:
646084 is the part number for the bearing kits.
646084 is the part number for the bearing kits.
Will this one work on the Planar of these years listed?
Willys Jeep Parts Tech:
Typically no. It's more set up for the 4WD vehicles but you could measure your sector shaft to confirm it. Thanks
Typically no. It's more set up for the 4WD vehicles but you could measure your sector shaft to confirm it. Thanks
What is the shaft length (from tip to base) on part number 907999k?
Willys Jeep Parts Tech:
7.5" overall like original.
7.5" overall like original.
What is shaft lenth and distance center to center of pins
Willys Jeep Parts Tech:
The length of the sector shaft itself comes out to 6-7/8". The distance between the pins measures out at 2". Thanks!
The length of the sector shaft itself comes out to 6-7/8". The distance between the pins measures out at 2". Thanks!
need steering gear box selector shaft for 1947 willys truck
Willys Tech:
We can help with a 'Tightsteer' kit and the bushings and oil seal on that. Please call us toll free.
We can help with a 'Tightsteer' kit and the bushings and oil seal on that. Please call us toll free.
I am restoring a 1948 Jeep Willys Pickup and during the disassembley I realized that the steering gear housing cover was cracked. However once it was removed I discovered that it was completely broken. I can't find any where that carries the cover or the whole steering gear housing as a unit any help on this would be awesome.
Willys Tech:
We can get you good used on this. Please call us toll free.
We can get you good used on this. Please call us toll free.
YOU MIGHT ALSO BE INTERESTED IN
