Questions & Answers
can you provide me with the gear diameter and total length of cluster
Willys Jeep Parts Tech:
If you can email mike@kaiserwillys.com on this and we can help out.
If you can email mike@kaiserwillys.com on this and we can help out.
Email mike@kaiserwillys.com what year and model you are working on and we can make sure to match it for you.
Can you please share teeth count of each ?
Willys Jeep Parts Tech:
Tooth count: 33x27x19x14
Tooth count: 33x27x19x14
I can obtain a very similar countershaft, with part number 923619, is that one identical (ie. later part number for the same shaft)?
Willys Jeep Parts Tech:
I dont have a listing for that part number.
I dont have a listing for that part number.
I bought an t-96 rebuild kit from you last year, in the kit the thrust washer has a pair of dimples or lock ears that are supposed to lock into the end of the cluster gear, my gear dose not have any notches to accept the thrust washer and upon looking at your new cluster gear I noticed your new gear also "dose not" have these notches. What to do? Also my three mid to rear bearings that were sent in the kit are sealed bearings the ones that I removed were open. Will they be Ok to use, the picture you have on the Internet site shows an open bearing! ?? Thanks for your help hope to hear from you soon!
Willys Jeep Parts Tech:
There are different versions used on the T96. Call us toll free and we can help you out and put you in contact with our transmission guy.
There are different versions used on the T96. Call us toll free and we can help you out and put you in contact with our transmission guy.
YOU MIGHT ALSO BE INTERESTED IN
