Questions & Answers
Is there a gasket available for under this transmission floor panel cover.
Willys Jeep Parts Tech:
No there is not, nor is one required.
No there is not, nor is one required.
Hi Mike, I have an M38 with a complete front floor with panels. The holes for the bolts are large. Do you have the correct bolts and washers; if not, what do you recomend? Thanks, Gary
Willys Jeep Parts Tech:
Give us a call to try to help.
Give us a call to try to help.
Hi MIke, I'm looking for the capture nuts that clip to the floor pan that are used to thread the mounting bolts of the cover panel. Can't seem to find them on your web site.
Willys Jeep Parts Tech:
That would be a hardware store item. We do not have a listing for those, unfortunately.
That would be a hardware store item. We do not have a listing for those, unfortunately.
Hey Mike I just removed this cover panel from the 1949 CJ3a and noticed some kind of seal under it. Do you have any information on this? Thank you.
Willys Jeep Parts Tech:
We dont make it but there was a thin seal there from the factory.
We dont make it but there was a thin seal there from the factory.
Is there a nother style for the 1966 cj5? I bought this one but it is to long and to narrow.
Willys Jeep Parts Tech:
If you can please take some photos of your floor board and email to mike@kaiserwillys.com so we can see what all you have going on. Thanks!
If you can please take some photos of your floor board and email to mike@kaiserwillys.com so we can see what all you have going on. Thanks!
Can you please provide me with dimensions L X W X Ht. of item # 688966. I assume it is stamped metal. Thank you, Tom
Willys Jeep Parts Tech:
L 14" W 7/12" H 2" HOLE SIZE 4"
L 14" W 7/12" H 2" HOLE SIZE 4"
The picture does not look like what I need for my 70 CJ-5. Is the picture accurate? Any way you can send me a picture of the part? Thanks
Willys Jeep Parts Tech:
Yes, this picture is accurate.
Yes, this picture is accurate.
YOU MIGHT ALSO BE INTERESTED IN
