Questions & Answers
I take it that the only difference between the 4 cyl. & the 6 cyl. input shafts are their length 9 1/16" vs 11 1/2". But are they both 15/16" shaft diameter by 10 spline
Willys Jeep Parts Tech:
There is a diameter difference as well.
There is a diameter difference as well.
I have a T90-A1 that is bolted up to a F134. I recently purchased a 6-226 with bell housing that will be going in my truck. Can I swap this with the out and make it work? Do I need anything else?
Willys Tech:
This should work because it has the longer shaft needed for the 6-226.
This should work because it has the longer shaft needed for the 6-226.
I have a T90 - A1 with a 7in. shaft and wanting to install it behind a Chevy V-8 that requiers this longer shaft. Will this interchange in the transmission with no gear issues or is anything else needed, Thanks
Willys Tech:
It should work for you. This is the one alot of people use when doing a conversion for the extra length needed.
It should work for you. This is the one alot of people use when doing a conversion for the extra length needed.
Is this a ten tooth spline or an 18?
Willys Tech:
These are 10 spline like original.
These are 10 spline like original.
Is this shaft for the t90J trans. I need the overall length if possible. thanks Mark
Willys Tech:
For the 6-226 with the T-90 it is 11-1/2 in overall length.
For the 6-226 with the T-90 it is 11-1/2 in overall length.
YOU MIGHT ALSO BE INTERESTED IN
