Questions & Answers
do you sell plugs for the REAR of the shift tower? does the transmission even require them?
Willys Jeep Parts Tech:
They did not use.
They did not use.
My Shift Rail has threaded plugs with a square 7/16" hole to remove them, one of the holes cracked and stripped out, do these caps replace the threaded plugs?
Willys Jeep Parts Tech:
Most were using these plugs that were unthreaded holes.
Most were using these plugs that were unthreaded holes.
Hi, I installed Transmission Shift Rail Cap Fits 46-71 Jeep & Willys with T90 Transmission Item # 642757 in the front of my shift tower rails , but these caps are too big of diameter to plug the holes at the rear of shift tower. Do you have any available that are the smaller diameter that will plug the rear holes ? Thanks
Willys Jeep Parts Tech:
They go in the front and have to be tapped in. If you can send a photo of your top shifter so we can see it. Mike@kaiserwillys.com
They go in the front and have to be tapped in. If you can send a photo of your top shifter so we can see it. Mike@kaiserwillys.com
Hello I m wondering if its require to put some plug in the back of the shift rails there is a good chance that like will appear from there its open thanks .
Willys Jeep Parts Tech:
No plug is required to install this cap.
No plug is required to install this cap.
YOU MIGHT ALSO BE INTERESTED IN
