Product Videos
Questions & Answers
Mike, I have the turn signal switch kit. I don't have a flasher. My Jeep is a '52 CJ-3A. It's converted to 12 volt. What else do I need to hook up the front turn signals. I have the original front parking lamps/lens but there is no wiring to them. Thanks much.
Willys Jeep Parts Tech:
You will need the flasher (938899) and the socket (A1361). Thanks
You will need the flasher (938899) and the socket (A1361). Thanks
Does it matter which wire goes to black wire on signal unit and which wire goes to power and which wire is not used? The flasher has X, L, and P stamped by the prongs.
Willys Jeep Parts Tech:
This is how you should wire it: X- POWER L - OUTPUT P - PILOT LIGHT
This is how you should wire it: X- POWER L - OUTPUT P - PILOT LIGHT
Does this turn signal flasher plug socket replace the current park light socket to make it a turn signal and park light?
Willys Jeep Parts Tech:
This is for your flasher to plug into with the turn signal kit.
This is for your flasher to plug into with the turn signal kit.
The wiring diagram that goes with your turn signal kit only shows 2 wires to the flasher. Where does the third wire go from the flasher?
Willys Jeep Parts Tech:
That is if you what an indicator light in your turn signal switch itself on the column.
That is if you what an indicator light in your turn signal switch itself on the column.
will this work with 938899 on my 1951 m38 12v?
Willys Jeep Parts Tech:
Yes, they are used together.
Yes, they are used together.
YOU MIGHT ALSO BE INTERESTED IN
