US Made Brake & Clutch Pedal Cross Shaft
Fits 46-64 Truck, Station Wagon

53 Pickup truck,,,,,Have this already welded in,,,the support bracket from the master cylinder is on a slight angel,,,and the cotter pin won't go or line up with the back hole..did I not get the new replacement thru the frame far enough,,,? The washer between the break lever and the end of the shaft is just a touch tight,,,I can enlarge the hole a bit and make it work,,,I put the new one at the same location as the one that I removed,,,but maybe enlarging the cotter pin hole is the best solution . One other question,,,I've put many 2A together,,but this is on the 53 Pickup with a F engine,,,side of the plate between the bell housing and engine has a little shor C channel with a hole,,and bable with ball end,,,on the cross member next to the transfer case is a place for the ball to be held,,It looks just like part # A5102,what is this for? I made all new parts for the clutch linkage ,,used Heim joints, and all the linkage works great,you should sell or see this,,,,it's not the clutch cable?,,,it was in the tab on the side of the bell housing plate when I got it. I got this completely disassemble everything from gauges to wire harnesses . Do have pictures if you need . Regards, Douglas