Save 10% off site-wide. Use code THXGV10 Exclusions apply.

FREE SHIPPING on all orders $98+ See Details

Select Your Currency
Close
  • Africa
  • Americas
  • Asia
  • Europe
  • Oceania
Shop Kaiser Willys

US Made Plastic Fuel (gas) Tank
Fits 46-64 Truck

Part # MTS-0010

New Moulded Plastic Fuel Tank

Made in the USA.

Highest quality reproduction plastic fuel tank. Bolts to all original mounting holes and is properly tooled for your 6 hole fuel tank sending unit.

Eliminates all the problems caused by a rusty fuel tank and saves your fuel system from drawing contaminates.

Fits:
46-64 Truck

Part # Price
MTS-0010

$299.99

MSRP:

$299.99

MSRP:

1 Item has been added to your cart!
Close

Questions & Answers

Please Wait...

Ask Question Add Answer

All questions will be displayed after moderation. All answers will be displayed after moderation.

what's the capacity? don't see it mentioned.

Willys Jeep Parts Tech:
I believe these are 14 gallons like original but will actually only take approx. 12.5-13 gallons due to the side filler.

could this tank be used with diesel?

Willys Jeep Parts Tech:
Yes that is correct.

Do you not carry a metal tank for a 1960 pickup truck?

Willys Jeep Parts Tech.:
MTS-018 is a USA made poly tank. The gentleman that used to make the steel one passed from Cancer a few years ago.

Where is the vent on this tank? Also can the pickup adapter be changed to a larger size 5/8 ?

Willys Jeep Parts Tech:
They didnt use a vent. But you could port one in if you wanted I would think. Most people use a vented gas cap.

Does the tank have a drain plug? Also, is the fitting for the suction line to fuel pump the original flared style fitting or is it barbed?

Willys Jeep Parts Tech:
It does not have a drain, it gets vented through the cap. And the port you are referring to is barbed.

What are the dimensions of gas tank Item # MTS-0010 ? Thanks

Willys Jeep Parts Tech:
Shipping dimensions: 29x22x15

Is there a 12 volt sending unit for this tank?

Willys Jeep Parts Tech:
Yes, the number is 914849. Thanks

What is the fuel capacity of this tank?

Willys Jeep Parts Tech:
They hold the original amount. I do believe they are a 13 gallon capacity.

Witch sending unit fits these tank, 6 volt 52 pickup?

Willys Jeep Parts Tech:
914849 is the part number for the Willys Truck.

I purchased the above tank. The pick up tube is 2 inches from the bottom of the tank. Is there a reason for this, it seem a little short to me.

Willys Jeep Parts Tech:
So you do not draw contaminants into your fuel system. Its best practices.

Will this tank work in an M38A1

Willys Jeep Parts Tech:
No, this is for the Willys Truck. You want part number: 805605

do you have measurements for this tank ?

Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com so we can get you the specific measurements your looking for. Thanks!

can this tank be adapted to fit a 51 henry j? If not do you have one that can be used?

Willys Jeep Parts Tech:
Ive not tried to fit. Im sure anything is possible, but I couldnt tell you for sure.

Does the poly tank require the fuel neck tube and the rubber connection hose?

Willys Jeep Parts Tech:
Yes, it does still require both. Thanks

Will the plastic tank hold up to diesel fuel?

Willys Jeep Parts Tech:
I will double check with the supplier but yes, it should. It is a hi quality USA made poly tank.

Is this tank suitable for a 62 FC 170 ? Thank you.

Willys Jeep Parts Tech:
They are different. We do offer a steel option for your Willys FC-150. Please call us toll free.

Do these tanks have breather ports? Hard to tell with the pic.

Willys Jeep Parts Tech:
Yes, there is a vent pipe on the tank.

how many gallons does it hold?

Larry Beardsley:
Original tank was 15 gallons per '48 Truck Shop Manual
Willys Tech:
They hold the original amount. I do believe they are a 13 gallon capacity.

what dimentions of this tank

Willys Tech:
22x20x8 like orignal

does this need a fuel filter

Willys Tech:
No, but they never hurt.

Is the filling spout (neck) the right legnth for a 52 PU.? Do I use my original straps for the plastic tank? Do I have to ground the tank to get a signal for the sender? Thanks...

Willys Tech:
Yes, these work perfect. You can use your original sending unit and they come with straps.

Do you have a strap kit for this tank?

Willys Tech:
This tank will come complete with it.

I have a cj2a with gas tank underneath in back. What will I need to replace it? Thanks.

Willys Tech:
Part number: 640685 is the tank. We also sell the sending unit, gas cap, strap, ect.

will this one work for a FC 150?

Willys Tech:
FC-150 tanks are different. I would have one fabricated there locally.

I have a 57 willys pickup w/duel tanks. The front tank dimensions are approx. 9x10x42. Do you stock this tank? And what is the part#,price,etc? It's an end fill with fuel line at center of bottom and mounts under the bed. Thank you

Willys Tech:
That is unoriginal. This is the proper tank for under the bed they originally used.

this tank come with fuel tank sending unit. tank you Jean-guy

Willys Tech:
This is tank only. We have the sending unit as well.

I purchased this tank a while ago and am wondering if it is okay with gasoline that contains ethanol since it is everywhere?

Willys Tech:
Yes ethanol is fine just make sure you have an updated gaskets in your carburetor and fuel pump.

what are the dimensions of this tank?

Willys Tech:
It is approx 22x20x9 they are direct bolt ins.
Request Catalog
X
THANK YOU! Your catalog request has been submitted successfully. Please note:

If your catalog does not arrive within 7-10 business days, call us Toll-Free at (888) 648-4923.

Email Subscription
X
THANK YOU! You have successfully subscribed to our newsletter.
Contact Form
X
THANK YOU! Your contact form request has been submitted successfully.
Photo Contest
X
SUCCESS! Your photo contest entry has been submitted!
Browser warning
The browser you are using to visit our website is no longer supported. For the best browsing experience, please visit us using a different browser.
I understand, close this message