Questions & Answers
Can the fuel sending unit be replaced on an installed Jeepster plastic fuel tank without having to lower the tank?
Willys Jeep Parts Tech:
It would be hard. You typically drop the tank.
It would be hard. You typically drop the tank.
When installing this tank, does the fuel sending unit need to be calibrated to this tank, or will the fuel gauge read correctly full to empty?
Willys Jeep Parts Tech:
You always will want to make sure that you are getting the proper swoop with the sending unit prior to install. But once you adjust the tabs for the arm range and it reads properly with the gauge, it will work the way it is supposed to once installed into this tank.
You always will want to make sure that you are getting the proper swoop with the sending unit prior to install. But once you adjust the tabs for the arm range and it reads properly with the gauge, it will work the way it is supposed to once installed into this tank.
I will be needing to drain the gas from this tank every year (sill be setting for 6 months at a time). Is there a drain plug available for this tank?
Willys Jeep Parts Tech:
I would use non ethanol fuel and fuel stabilizer if your worried about bad gas.
I would use non ethanol fuel and fuel stabilizer if your worried about bad gas.
I am in need of a top fill tank that measures 9x19x24 wide do you have anything that might work?
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com alittle more vehicle information and we can try to help out.
Please email mike@kaiserwillys.com alittle more vehicle information and we can try to help out.
You didn't answer David Rundells question. He wanted to know if the external fuel pickup line, from inside the tank, is included and if the fuel line attaches to the outside of the plastic tank the same way as the old metal tank. The pictures you post do not adequately show how the fuel line is to be attached.
Willys Jeep Parts Tech:
The tank has a nipple port to accept a flexible fuel line.
The tank has a nipple port to accept a flexible fuel line.
Why don't you put the dimensions with your fuel tank listings?
Willys Jeep Parts Tech:
If you need a specific measurement email mike@kaiserwillys.com. Always happy to help.
If you need a specific measurement email mike@kaiserwillys.com. Always happy to help.
What are the diminutions of this tank?
Willys Jeep Parts Tech:
They are roughly 10x20x30 just like original. Thanks
They are roughly 10x20x30 just like original. Thanks
does plastic tank for Mts0018a have the fuel line and sending unit.attached? My tank has the fuel connection coming straight out the front of the tank,does the plastic tank have the same connection? Also besides the hose extension 200462 what other parts will be needed for the total installation. Thank you david rundall
Willys Tech:
The fuel line and sending unit are separate. We have new sending units part number: 914848. You will need to reuse your old steel filler neck and our part number: 200462.
The fuel line and sending unit are separate. We have new sending units part number: 914848. You will need to reuse your old steel filler neck and our part number: 200462.
What size gas line (inside diameter) does it require?
Willys Tech:
I think its 1/4 but will have to check. It takes the original size line.
I think its 1/4 but will have to check. It takes the original size line.
How many gallons does this tank hold?
Willys Tech:
It is a 17 gallon tank like original but has a 13 gallon liquid capacity due to side filler neck like original.
It is a 17 gallon tank like original but has a 13 gallon liquid capacity due to side filler neck like original.
51 jeepster gas tank has a long fill neck. Your plastic replacement needs an adaptation? Such as cutting original neck of the fill nozzle off the orignial tank and joining it with a rubber gas hose junction-connector?
Willys Tech:
We do carry the filler hose. Part number: 200462
We do carry the filler hose. Part number: 200462