Questions & Answers
I have a 70 CJ5 with a sbc 283 and wondering if this would fit. Can I get the overall dimensions?
Willys Jeep Parts Tech:
As long as it doesnt interfere with the original radiator it should.
As long as it doesnt interfere with the original radiator it should.
is a shroud available for the 66 V6 CJ6??
Willys Jeep Parts Tech:
As of right now, no. We just have the 4 cylinder option. Thanks
As of right now, no. We just have the 4 cylinder option. Thanks
I am contemplating a recore of my current radiator or to buy a new one. I have a 1969 CJ5 with the Buick 231(I was told it's not the 225) engine, will this fit? The radiator is 22" across the top.
Willys Jeep Parts Tech:
Yes, this would be the correct one for you.
Yes, this would be the correct one for you.
Is this a 2 or 3 row radiator?
Willys Jeep Parts Tech:
3 Row
3 Row
What's the height dimension of the 17" radiator
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com exactly what dimensions you are looking for and we can provide. Im not sure if you mean core height or overall height.
Please email mike@kaiserwillys.com exactly what dimensions you are looking for and we can provide. Im not sure if you mean core height or overall height.
I have a 66 CJ 5 with a small block Chevrolet in it do you have a radiator that will fit?
Willys Tech:
I would recommend this one. It will bolt up to your existing grill like original and give you plenty of cooling.
I would recommend this one. It will bolt up to your existing grill like original and give you plenty of cooling.
does radiator part # 941073 also fit 65 cj 3b with a buick 231 v6 ?
Willys Tech:
They never really put that engine in the CJ-3B so its tough to say. Im sure it could be made to work however. They will have plenty of cooling.
They never really put that engine in the CJ-3B so its tough to say. Im sure it could be made to work however. They will have plenty of cooling.
I have a 1962 CJ5 with a Buick 231 V6. It currently has an adapted mustang radiator. Would this fit to the stock grill and would it fit above the crossmember? I think that the previous owner cut the stock mounts so what would the radiator normally mount to? The engine has the thermostat in the top center and the lower radiator hose is towards the passenger side. Would the stock hoses work or what would? Thanks a lot.
Willys Tech:
Its tough to say given you have an unoriginal engine in there. This is the proper radiator for the year ranges above.
Its tough to say given you have an unoriginal engine in there. This is the proper radiator for the year ranges above.
Do you have a radiator shroud for a 70 CJ5 with v6?
Willys Tech:
That is availble good used only.
That is availble good used only.
Where are the spouts located? Mine is top center and lower passenger side. Is this the same? Thanks
Willys Tech:
Yes I believe that is correct but will have to check. They are in the original spots so the proper moulded radiator hoses match up.
Yes I believe that is correct but will have to check. They are in the original spots so the proper moulded radiator hoses match up.
My 1967 CJ5 w/225 oddfire does not have an original radiator. The original holes for mounting the radiator measure about 18.5 inches across. Which radiator would be same as original? Thanks.
Willys Tech:
This is the correct one. Please call us toll free. We can ask you some questions and get it fixed up for you.
This is the correct one. Please call us toll free. We can ask you some questions and get it fixed up for you.