Questions & Answers
Does the `52 CJ3A require this rod? Thank you
Willys Jeep Parts Tech:
If your a bottom mount radiator that has the tap at the top to take the end of the rod.
If your a bottom mount radiator that has the tap at the top to take the end of the rod.
will this work on a 1950 m38
Willys Jeep Parts Tech:
It may, but you may have to drill a couple holes.
It may, but you may have to drill a couple holes.
I need the driver side RADIATOR TO COWL SUPPORT ROD for 1965 cj5
Willys Jeep Parts Tech:
Used only. Email mike@kaiserwillys.com to help.
Used only. Email mike@kaiserwillys.com to help.
Will this fit my 3b ? Thanks
Willys Jeep Parts Tech:
No they did not use one if a side mount radiator. Only bottom mount.
No they did not use one if a side mount radiator. Only bottom mount.
Were the radiator support bar standby on a 1951 cj 3a ?
Willys Jeep Parts Tech:
Most 3a's are side mount and dont have one.
Most 3a's are side mount and dont have one.
I am working on a 1946 CJ2A that somebody else partially restored...about 95% . I have never had one of these jeeps so I know this rod is needed but there is only a hole on the radiator side. Where does it attache on the other end?
Willys Jeep Parts Tech:
That goes back to the lip of the cowl down center of motor.
That goes back to the lip of the cowl down center of motor.
I have a 63 cj5 with a dauntless installed and need the passenger side rod. Do you have or know where to get one?
Willys Tech:
642057 is the part number you need if your wanting steering parts. If you want the cowl support rod then that is available salvage yard only for that vehicle.
642057 is the part number you need if your wanting steering parts. If you want the cowl support rod then that is available salvage yard only for that vehicle.
YOU MIGHT ALSO BE INTERESTED IN
