Questions & Answers
1961 CJ5 The OEM bracket has a tube the bushing goes into. This is the replacement for that bracket?
Willys Jeep Parts Tech:
There isn't a tube in that bracket originally. If there were a tube, you wouldn't be able to put the leaf spring in place.
There isn't a tube in that bracket originally. If there were a tube, you wouldn't be able to put the leaf spring in place.
Would this also serve as a replacement for a 67 Jeepster Commando
Willys Jeep Parts Tech:
No, they use different size pivot eye hardware. But maybe you could drill it out to fit.
No, they use different size pivot eye hardware. But maybe you could drill it out to fit.
what is the size of the hole that the bolt goes through?
Willys Jeep Parts Tech:
3/8 in
3/8 in
What is the inside side-to-side measurement?
Willys Jeep Parts Tech:
It is designed for 1-3/4" leaf springs. They slide right up between the sides with just a bit of clearance. If your 2.5" that sounds more like Willys Truck rear.
It is designed for 1-3/4" leaf springs. They slide right up between the sides with just a bit of clearance. If your 2.5" that sounds more like Willys Truck rear.
Willys Jeep Parts Tech:
These are for 1-3/4" wide leaf springs to got into.
These are for 1-3/4" wide leaf springs to got into.
Is this correct for the front springs, rear perch?
Willys Jeep Parts Tech:
Yes, this is the pivot eye end for the leaf spring for both front and rear leaf spring assemblies on the vehicle.
Yes, this is the pivot eye end for the leaf spring for both front and rear leaf spring assemblies on the vehicle.
YOU MIGHT ALSO BE INTERESTED IN
