USA Made Clutch & Brake Pedal Arm Bushing Fits 46-64 Truck, Station Wagon

USA Made Clutch & Brake Pedal Arm Bushing
Fits 46-64 Truck, Station Wagon

Part # 906568

New USA Made Clutch and Brake Pedal Arm Bushing (2 required per vehicle).

Helps eliminate slop and sway in your clutch and brake pedal arms.

Fits:
46-64 Truck
46-64 Station Wagon

Part #	Price
906568	$14.99 MSRP:

$14.99

MSRP:

Questions & Answers

Is there a similar sleeve for the brake pedal slop on a CJ3b? Or is it best to replace the crossover tube and pedal arm?

Willys Jeep Parts Tech.:
You would have to make one for the Jeep. Or we have new cross shafts too that help slop.

will this bushing fit the BRAKE pedal arm on the 1953 M38A1

Willys Jeep Parts Tech:
This is for Willys Truck and Station Wagon only.

What is the best way to get these bushings out?

Willys Jeep Parts Tech:
Press them in an out with a vice or hydraulic press.

What is the best way to get out the worn bushing?

Willys Jeep Parts Tech:
I would try to press it out with a vice and proper size socket.

does the m38 have one? I am in need unless there is an alternate fix like a complete new pedal arm.

Willys Jeep Parts Tech:
That you would have to have made there locally.

I need two of these for my 50 Jeepster, do you stock?

Willys Jeep Parts Tech:
Yes, these are in stock and ready to ship. Thanks

will this work for Willeys 1948 cj-2a ?

Willys Jeep Parts Tech:
The CJ-2A didnt originally use these.

Hey Mike, I talked to you on the phone today. I believe you said the bushing was 1“ OD, 7/8” ID. Is that correct? If that is so do I need to drill out or ream out the pedal to accept the new bushings? The Holes in mine are just over 7/8” Thanks

Willys Jeep Parts Tech:
Yes, you must ream to exactly 1" for proper fitment.

need a bushing for my 48 cj2a brake arm will this one work

Willys Jeep Parts Tech:
No, these would not be correct. The CJ-2A never used bushings on the brake arm. If you have some play, you should check the cross shaft as that is what the arm attaches to. Please give us a call toll free at 888-648-4923 if you have any other questions. Thanks

Do you carry brake and clutch pedal arms for a 1955 willys pickup?

Willys Jeep Parts Tech:
Those are good used. Please email mike@kaiserwillys.com

1955 md m38a1 need brake pedal bushing

Willys Jeep Parts Tech:
We have new cross shaft A495 and pedal arms that will fix you up. Please call us toll free and ask for Mike M.

I need the same bushings for my '51 Jeepster. Any suggestions? Thanks.

Willys Jeep Parts Tech:
I would have a machine shop sleeve it there locally.

My 58 wagon's clutch peddle wobbles like crazy. I'm guessing it's the bushing, haven't crawled under it yet..... Assuming this IS the problem, do the bushings have to be pressed on?

Willys Jeep Parts Tech:
Yes, that is correct. Thanks!!

Do you have one for a CJ3a or M38?

Willys Jeep Parts Tech:
Sorry they didn't use these originally on these.

I'm still putting finishing touches on my 48 willys I nee the bushings for the break and clutch arm that pivots do you have a part number

Willys Tech:
This is the proper part above.

good for 71 cj5 clutch pedal ?

Willys Tech:
No this is only for the vehicles listed

will this bushing work on my 1970 cj5 brake and clutch linkage

Willys Tech:
Probably not but we do have a few different sizes available. Please call us toll free. We can help.

WILL THIS PART WORK ON A BRAKE PEDAL 1944 WILLYS MB?

Willys Tech:
This is for Willys Truck / Station Wagon only