Product Videos
Questions & Answers
Hi Do you sell just the dipstick for the L-134?
Willys Jeep Parts Tech:
Unfortunately, that is not something we have by itself.
Unfortunately, that is not something we have by itself.
Can the vent tube at the tube of the the dip stick tube be rotated? On the dip stick tube I received the vent tube is not parallel to the flattened portion of the oil tube. Does it matter if the flattened portion isn’t facing away from the block?
Willys Jeep Parts Tech:
Give us a call or email mike@kaiserwillys.com and we can see what we can do to help.
Give us a call or email mike@kaiserwillys.com and we can see what we can do to help.
After some research it appears that this oil fill tube will fit a 55 CJ3B F-134. Can you tell me if that is indeed the case? If not, can you provide me with the correct part number? Thanks, Jack Thompson roadkingjt@yahoo.com
Willys Jeep Parts Tech:
The main difference between the L and the F was the length of the dipstick. The tube itself will fit, but the dipstick length may be the main issue.
The main difference between the L and the F was the length of the dipstick. The tube itself will fit, but the dipstick length may be the main issue.
will this fit 1957 jeep truck 226 engine?
Willys Jeep Parts Tech:
Sorry, this is for the 4-134 engine only.
Sorry, this is for the 4-134 engine only.
Is there any kind of seal between the engine oil dipstick tube and the engine block? My dipstick tube is loosen up at the engine block hole and oil leaks through it.
Willys Jeep Parts Tech:
There is a seal there but unfortunately it is not available. You will have to trace it out of gasket material on your own. Thanks
There is a seal there but unfortunately it is not available. You will have to trace it out of gasket material on your own. Thanks
Will this fit an M38A1? I don't see it on the fitment list but it looks a lot like the dented one in my '52 M38A1.
Willys Jeep Parts Tech:
I would try to fix yours or we may be able to get you a good used one.
I would try to fix yours or we may be able to get you a good used one.
I am looking for a reclacement gasket / grommet that goes in the oil fill cap / dipstick for a 46-49 cj2a. Looks like mine has a cork gasket and someone may have put a rubber one on top of that. Mine does not seal well or tighten down. Do you have just that part? Does this part have a good gasket in it?
Willys Jeep Parts Tech:
You'l have to make that gasket out of paper gasket material.
You'l have to make that gasket out of paper gasket material.
YOU MIGHT ALSO BE INTERESTED IN
