Steering Service Diagnosis - CJ-5

Steering system illustration shown for reference only - click here to shop for these parts by interactive diagram

Steering System Diagram

Looking for Steering parts for your vintage Willys or Jeep? Shop steering parts by Category or by Diagram

Hard Steering: Possible Solution:
Lack of lubrication Lubricate all connections
Tie rod ends worn Replace
Connecting rod ball joints tight Adjust
Cross shaft improperly adjusted Adjust
Steering gear parts worn Replace
Steering Loose: Possible Solution:
Tie rod ends worn Replace
Connecting rod ball sockets worn Replace
Steering gear parts worn Replace
Steering gear improperly adjusted Adjust
Road Shock: Steering connecting rod too tight; axle spring clip loose; wheel bearings loose, poor shock absorber control
Turning Radius: Short one side Center bolt in spring sheered off, axle shifted, steering arm bent, steering arm not properly located on steering gear

* Excerpt from the Service Manual for Universal Jeep Vehicles page 221